When installing battery cells, pay careful attention to the positive and negative poles. Cells must be placed in the correct order and polarity must not be reversed, as incorrect polarity can cause serious safety hazards and damage to the battery system.
Approfondir
Prérequis
- Pas de données disponibles.
Prochaines étapes
- Pas de données disponibles.
Approfondir
Docan Energy: 51.2V 314Ah 16kWh DIY BatteryIndexé :
Check out the installation guide for our DIY battery kit! The updated version comes with pre-installed BMS and panel parts for much easier assembly. - JK PB2A16S20P V19 BMS - 4.3 Inch touchscreen - 200A DC breaker Interested in our DIY kits? Place your order via our official website. In-stock items available in the US and Europe. EU warehouse stocks DIY kits: https://www.docanenergyshop.com/EU-stocks/EU-stocks-stackable-DIY-kits-JKBMS EVE MB31 314Ah cells: https://www.docanenergyshop.com/EU-stocks?product_id=491 USA warehouse stocks: DIY kits: https://www.docanenergyshop.com/USA-stocks?product_id=489 EVE MB31 314Ah cells: https://www.docanenergyshop.com/USA-stocks?product_id=493
Hi everyone, I am Alan from Doken Energy.
This video will show you how to install our DIY kit.
Please note we have already completed the installation of the panel part before shipment.
First lay the insulation board inside the case. Then place the cells in order.
Pay attention to the positive and negative poles of the cells.
Do not connect them in reverse.
Install the front baffle and tighten the screws.
You can first align all the screws with their corresponding holes before tightening them securely.
Connect the buser to the cells.
Place the gasket on each buser.
Fix the bus with screws.
Tighten the screws with power tools.
Please note that it must not exceed 7 nm.
place acquisition. boards into the chassis and fix them in place.
Put the black interface on the left and the white one on the right.
Connect the acquisition cables and temperature wires to the middle of the buser and fasten with screws.
Install the BMS part and connect the long buser to the positive and negative poles of the battery.
Connect the BMS sampling wires by color.
Tighten the screws on the panel.
Cover the top cover and fasten it with screws.
Installation completed. Press the start button to activate the battery.
Select the language in the upper right corner of the screen.
You can check the current status, voltage, and temperature of each cell on the screen.
Also can switch communication protocols of different inverters on the screen.
You can scan the QR code to download the app. Then connect to the battery via Bluetooth for monitoring and parameter modification.
This DIY kit is in stock at our EU and USA warehouse now.
Feel free to leave a message or visit our website for more information if you are interested.
I am Alan from Doken Energy. See you next time. Bye.
Vidéos Similaires
How Persia Made Ice Without Electricity #HistoryShorts
theshadowofempires
936 views•2026-05-15
How Ancient Japan Defies Earthquakes Without A Single Nail ⛩️⚡ #shorts
JapanBeyond_History
860 views•2026-05-17
Boeing C-17 Globemaster III | The World's Most Advantage #military #militarytechnology #shorts
Miltechidn
847 views•2026-05-15
Jeff Lutz's Drag and Drive Pro Mod is BACK with a Noonan HEMI and FT700PLUS! | FuelTech USA
FuelTechUSA
163 views•2026-05-15
The Brake Temperature Explained
PositiveAttitudeAviation
833 views•2026-05-18
Corebooting The Last Great ThinkPad
theradlectures
324 views•2026-05-22
NC750X DCT 2026 - Shock Therapy - Little links, Big difference
Adventures_NC750X
185 views•2026-05-22
The Most Expensive Commercial Airplane in the World | Worth $445 Million!
AeroMonitor
108 views•2026-05-20











